How to Flash (Unbrick) MTK Android Devices Using Miracle Box

Here is a complete tutorial that teaches you how to flash MTK Android devices using Miracle Box or Eagle eye Miracle Box with stock ROM firmware.
Miracle Box is regarded as the most reputable Flashing Software(Box) probably because it supports many phone models from different platforms. Besides, it also has lots of exclusive services contained.

NotePage Content Menu
This tutorial is made specifically for those who have purchased the A B C Package. A B C Package is a special phone software repair package prepared for every individual who wish to learn solutions to various phone software problems and perhaps, start practicing mobile phone software repairs hence; earning living in the cause. Details about A B C Package is here

Questions and Answers

Q #1: Do I Need Box to Use this Miracle Box to Flash MTK Androids?
    A: No. This copy of Miracle Box does not require box. Just a working USB Cable is ok to Flash any MTK Androids.
Q2:SP Flash or Miracle Box. Which One is the Best?
    A: Both are good for flashing MTK Androids. Use the one that's preferred by you.
Q3:Miracle Box or Eagle Eye Miracle Box. Which one should I use?
    A: Use anyone of them. They are virtually identical.

Supported PC

  • Windows PC


  • Make sure your battery is at the least 50% charged before your begin flashing.
  • Make sure that you have stable power supply and backups for your PC.
  • Make sure that you flash with the exact firmware variant.
  • Do Not proceed with Miracle Box if you're not sure. Use SP Flash instead.

How to Flash MTK Android Devices Using Miracle Box with Stock ROM Firmware

Step #1. Download Miracle Box from the Download Section here.

Step #2: Extract the Miracle Box zip file into a folder on your PC.

Step #3: Locate Miracle loader.exe from within the Miracle Box folder and double click it to launch the Miracle loader.exe (preferably, launch it as administrator).

Step #4. Wait till Miracle Box opens and the Dashboard is fully loaded.

Step #5. Click the MTK Tab and then, tickets Write.

Step #6. Select the phone's chipset from the dropdown menu e.g MT6589.

Step #7: Click the folder icon visible to you.

Step #8: In the window that pops up, browse or navigate to the folder where you have the stock ROM firmware for the MTK Android device you wish to Flash and select the firmware for the phone model. It should be in .bin format and then click Open it.

Step #9. Click the Start button.

Step #10. Switch off the phone (with a charged battery inside it) then connect it to the PC via USB cord. Miracle Box should detect the phone almost immediately.

Step #11. Miracle box should begin flashing the firmware, wait till it gets to 100%.

Step #12. Once it gets to 100%, close Miracle box and disconnect the phone.

By now, you have successfully flashed stock ROM firmware on your MTK Android device using Miracle Box.

Download Section

Similar Tutorials:

Must Read:


  1. Wish I could use it. My X-BO V6 is in a bootloop and reboots before drivers n miracle can't load.

  2. Hello! nice tutorial....

    my tecno w3 is totally bricked and I am unable to identify the right rom. someone help me please. or imo/whatsapp +254717724171