How to Enter Download Mode On LG Spectrum VS920

Download Mode is necessary when you need to unbrick a particular LG Android device or to be more specific, LG Spectrum VS920. You have to boot your LG android device to Download Mode so that LG Flash and Unbrick tools such as LGUP and LG Flash Tool maybe able to connect, recognise and communicate with your LG android device from the PC.


Booting LG Spectrum VS920 to Download Mode

The step by step guides given hereunder explains how to boot your LG Spectrum VS920 to Download Mode.


1. Download and Install LG Android USB Drivers from the Download Section here.


2. Power off your LG Spectrum VS920 or if possible, remove the battery from it.


3. Connect the compatible USB Cable for your LG Spectrum VS920 to the PC.


4. Press and Hold the Volume Up button of your LG Spectrum VS920. If you have removed the battery, insert the battery and then, while still holding the Volume Up button, connect the USB Cable to the phone.


6. Keep pressing the Volume Up button until an image similar to the one below appears on your LG Spectrum VS920 screen.



Good! That's your LG Download Mode! You can now use your favourite LG Service tools to unbrick, flash, downgrade or upgrade your LG Spectrum VS920.


Download Section

Download LG Android USB Drivers from here

Become An ArykTECH Specialist

How to Enter Download Mode On LG Spectrum VS920 How to Enter Download Mode On LG Spectrum VS920 Reviewed by ArykTECH S . O Arewa on July 27, 2016 Rating: 5

No comments:

feedback