HomTom HT3 Stock ROM Firmware Download

HomTom HT3 Stock Firmware Flash File

HomTom HT3 Stock firmware which I have attached here is HomTom HT3 stock ROM firmware which can be used to flash stock firmware on HomTom HT3 using any compatible flash tool. To use this HomTom HT3 flash file, you need to use a service tool that can flash stock ROM of this stock firmware file format.


In the paragraphs that follow below here, you will be able to download your HomTom HT3 stock ROM then step by step guides on how to flash the HomTom HT3 stock firmware on your HomTom HT3 device using the HomTom HT3 flash file you have just downloaded shall follow.


NOTE:
1. I will only give detailed tutorial using one of the many tools that can flash HomTom HT3 stock firmware on your HomTom HT3, then reference other MTK service tools that can flash the same HomTom HT3 stock ROM format.
2. Before you attempt to use this HomTom HT3 flash file, ensure that the HomTom HT3 stock firmware is exactly for your HomTom HT3 hence, the slightest difference may cause serious damage.
3. While comparing the stock firmware, your HomTom HT3 installed android OS version doesn't really matter.
4. Proceed to following the step by step guide on how to flash stock firmware on your HomTom HT3 device with caution.
5. Lastly, pay attention to every detail.


HomTom HT3 Stock Firmware Download Link

HomTom HT3 Stock ROM Flash File Download Link

For HomTom HT3 Stock Firmware and all other Innjoo Stock ROM see here: All Innjoo Stock ROM Firmware List Here


How to Flash Stock Firmware On HomTom HT3 Using SP Flash Tool

1. Download SP Flash Tools on your PC. You can download SP Flash Tools from here.
2. Extract the HomTom HT3 stock ROM you downloaded in a folder on your PC.
3. Download MTK Android VCOM USB Drivers and install it on your PC. You can download MTK USB VCOM Drivers from here. NOTE: You may skip this step if you have installed MTK USB Drivers already.
4. Extract SP Flash Tools which you have downloaded in the step 1 above on a folder on your PC.
5. In the SP Flash Tool folder (from step 3 above), locate Flash Tool.exe and double-click to open it. You may also right-click and launch it as Admin.

HomTom HT3 Stock Firmware Flash Guide -Step 5

6. When SP Flash Tools UI shows up, click Scatter Loading. A window will pop up. Navigate to the folder where you have extracted your HomTom HT3 stock ROM and select MTKXXXX-Android-Scatter... where xxxx refers to your HomTom HT3 MTK version.
HomTom HT3 Stock Firmware Flash Guide -Step 6

HomTom HT3 Stock Firmware Flash Guide -Step 6-B

7. By now, SP Flash Tool should load and list all the partitions in the firmware folder. Mark everything partition except Preloader, UserData and Cache.
HomTom HT3 Stock Firmware Flash Guide -Step 7

8. Now, click Download on SP Flash Tool.
HomTom HT3 Stock Firmware Flash Guide -Step 8

9. Turn off your HomTom HT3 or (remove battery from and re-insert it) again. Connect your HomTom HT3 to the PC and briefly tap the Power button.
10. Once the device is connected, Windows will install the drivers necessary for the flashing operation and then, the flashing operation will commence.
11. When the flashing operation completes, SP Flash Tool will display a green PASS circle. Only then you may disconnect your phone from the PC.


If you encounter any errors while flashing your HomTom HT3 using SP Flash Tool, refer to this List of All SP Flash Error Codes and Solutions here.

Other Tools that Can Flash HomTom HT3 Stock Firmware

1. NCK Box Tutorial
2. Piranha Box Tutorial
3. Miracle Box Tutorial
4. QPST QFIL Tools - **for Innjoo Qualcomm chipsets


Video Tutorial: How to Flash All MTK Android Devices Including HomTom HT3



Become An ArykTECH Specialist

HomTom HT3 Stock ROM Firmware Download HomTom HT3 Stock ROM Firmware Download Reviewed by ArykTECH S . O Arewa on July 30, 2017 Rating: 5

No comments:

feedback