How to Unbrick LG D410 ( L90 Dual ) In HS-USB DLoader 9008 With Loader.img File

LG D410 L90 Dual Unbrick with Loader.img file

If you have a bricked LG D410 ( L90 Dual ) that's stuck at Qualcomm HS-USB QDLoader 9008 mode, you can unbrick the LG D410 ( L90 Dual ) using the loader.img file. This loader.img file method is especially useful if you want to unbrick your LG D410 ( L90 Dual ) using the official LG Flash Tool method and save yourself the stress of dealing with QPST QFIL, Tool Studio eMMC Download Tool or Mi Flash Tool method of unbricking Qualcomm powered devices which might be too tedious for you.

In this guide, I provide you with all the information required to unbrick your LG D410 ( L90 Dual ) and most of the tools needed. All you have to do is follow the step by step guides and bring an end to the QHS-USB QDLoader 9008 brick state your LG D410 ( L90 Dual ) has been for days.

The Required Files (Downloads / Items)
File Download Link(s) Description
LG Bridge SKIP this if installed already. LG Bridge is LG's official service and support tool for more recent LG mobile phones. The LG Bridge is launched to replace LG Flash Tool. This tool will be used to download and flash official LG Stock ROM firmware on your LG D410 ( L90 Dual ).
LG PC Suite This tool is similar to LG Bridge whose download link has been given just above here only that the LG PC Suite now works better with older LG phones. Use this if you don't understand or cannot work with LG Bridge.
DiskImageRev2 DiskImageRev2 is the utility tool that will be used to flash the loader.img file on your SD Card and this in turn, will make your SD Card bootable so that when inserted in your LG D410 ( L90 Dual ), your device can boot from it.
LG D410 ( L90 Dual ) Loader.img This turns your SD Card to a bootable partition that can be mounted by your device so that LG Bridge or similar tool can detect your device and flash official stock firmware on it.
Your SD Card For your LG D410 ( L90 Dual ), get either 2GB or 4GB SD Card. - the later is recommended.

Step By Step Guide to Unbrick your LG D410 ( L90 Dual ) In Qualcomm HS-USB QDLoader Mode

1. Download either LG Bridge or LG PC Suite from the table above and install it on your PC.
2. Download DiskImageRev2 also from the table above and extract it onto a folder on your PC.
3. Make your SD Card bootable by flashing the Loader.img file on the SD Card using DiskImageRev2. See instructions below here.

4. Slot / insert the SD Card in your LG D410 ( L90 Dual ) card slot and power on the phone by pressing the power button a couple of seconds.
5. Hold on for few seconds while the phone boots to recovery. Sometimes, it might take up to 2 to 5 minutes before your LG D410 ( L90 Dual ) boots to recovery mode using this method.
6. Connect your LG D410 ( L90 Dual ) to the PC and wait while the drivers are being installed on your PC.
7. Launch LG Bridge (LG PC Suite) depending on the one you have installed on the PC.
8. LG Bridge or LG PC Suite will detect your LG D410 ( L90 Dual ) and display an upgrade prompt.
9. Follow the steps as instructed by LG Bridge to complete the firmware installation.
10. Once the installation is completed, your LG D410 ( L90 Dual ) will reboot. You can now complete the setup step from the phone screen.

The Does and Does Not of this Method
The Does The Does Not
With the correct LG D410 ( L90 Dual ) Loader.img file, you will be able to access your LG D410 ( L90 Dual ) recovery partition again. The LG D410 ( L90 Dual ) Loader.img file ONLY boots your device to recovery mode and not the OS.
This method aid your LG D410 ( L90 Dual ) unbrick solutions. It's not the do-it-all. This LG D410 ( L90 Dual ) Loader.img file will not boot your device to OS. You need full firmware to do that.
This Loader.img file only loads LG Stock Recovery partition on your device. This Loader.img file does not currently load custom recovery such as TWRP on your LG D410 ( L90 Dual ) therefore, only Stock Firmware can be restored to using the method described above.
The SD Card (used) helps boot the device into receovery mode ONLY. You cannot use the same SD Card with the device except you format it. You can use Mini Tool to Partition or format the SD Card for re-use.

Troubleshoot! Having Issues Using this Method? See Below:
Issue(s) Solution(s)
LG Bridge successfully restored my device but my LG D410 ( L90 Dual ) still boots to recovery. What can I do? Before you boot up the phone or while the phone boots up, make sure you remove the SD Card from the phone.
The PC no longer see my LG D410 ( L90 Dual ) in Qualcomm HS-USB QDLoader mode. What's wrong? Until the SD Card is in your phone, PC will continue to seeing the phone as functioning properly but only with flat battery.
My LG D410 ( L90 Dual ) is stuck at boot logo instead of booting to recovery. What can I do? Try another SD Card. You must use a first class grade one SD Card that's really fast.
My LG D410 ( L90 Dual ) is in recovery mode but LG Bridge or LG PC Suite does not detect it. Is something wrong? Yes. Something is wrong. Check your USB Cord, USB Port or make sure that your drivers are properly installed. With each instance, you can try with another device to confirm.
Have other questions? Good! Drop your comment. I shall attend the question(s) and also include it in the list table.

How to Create Bootable SD Card with Loader.img File On your PC

1. First, format your SD Card.
2. Go to the folder where you have extracted DiskImageRev2 and open it. Remember, you have downloaded it from the first table above.
3. Slot your SD Card in a card reader and connect it to your PC.
4. Launch DiskImageRev2 on your PC - as Admin preferrably.
5. On launch, DiskImageRev2 should detect and display the drive where your SD Card is connected. If otherwise, browse to select the drive.
6. From DiskImageRev2, browse to the folder where you saved/copied the Loader.img file on your PC and select it.
7. Now, click Write and wait until DiskImageRev2 completes the process.

    Once DiskImageRev2 has successfully written the files on the SD Card, your SD Card is now bootable! You may now insert it on your LG D410 ( L90 Dual ) and boot the device just by powering on the phone.

To boot your device with the just created bootable SD Card,

    a. Power Off your device by any means.
    b. Slot the bootable SD Card in the phone.
    c. Power On the phone by pressing the Power Button.
    d. Wait for some minutes while your phone is been booted. The phone will go straight into recovery screen.

Now, go to Step By Step Guide to Unbrick your LG D410 ( L90 Dual ) at the Top Here to load stock firmware on your LG D410 ( L90 Dual ).

Having issues to solve or questions to ask? Please, explain in detailed in the comment box below.


  1. Hola buenas noches necesito el loader.img de un K371 por favor


  2. I did the procedure and it worked. But now the device only restarts with the sd inserted, if the sd is removed and the cell phone is not connected, if I re-insert the sd it starts normally. Can you help me?

    1. While the SD Card is inserted, you should flash stock firmware on the device using official LG Tool as provided in the tutorial above.