Hisense F31 Stock ROM Firmware (Flash File)

Hisense F31 Stock Firmware Flash File

Hisense F31 Stock firmware which I have attached here is Hisense F31 stock ROM firmware which can be used to flash stock firmware on Hisense F31 using any compatible flash tool. To use this Hisense F31 flash file, you need to use a service tool that can flash stock ROM of this stock firmware file format.


In the paragraphs that follow below here, you will be able to download your Hisense F31 stock ROM then step by step guides on how to flash the Hisense F31 stock firmware on your Hisense F31 device using the Hisense F31 flash file you have just downloaded shall follow.


NOTE:
1. I will only give detailed tutorial using one of the many tools that can flash Hisense F31 stock firmware on your Hisense F31, then reference other MTK service tools that can flash the same Hisense F31 stock ROM format.
2. Before you attempt to use this Hisense F31 flash file, ensure that the Hisense F31 stock firmware is exactly for your Hisense F31 hence, the slightest difference may cause serious damage.
3. While comparing the stock firmware, your Hisense F31 installed android OS version doesn't really matter.
4. Proceed to following the step by step guide on how to flash stock firmware on your Hisense F31 device with caution.
5. Lastly, pay attention to every detail.


Hisense F31 Stock Firmware Download Link

Hisense F31 Stock ROM Flash File Download Link

For Hisense F31 Stock Firmware and all other Innjoo Stock ROM see here: All Hisense Stock ROM Firmware List Here


How to Flash Stock Firmware On Hisense F31 Using SP Flash Tool

1. Download SP Flash Tools on your PC. You can download SP Flash Tools from here.
2. Extract the Hisense F31 stock ROM you downloaded in a folder on your PC.
3. Download MTK Android VCOM USB Drivers and install it on your PC. You can download MTK USB VCOM Drivers from here. NOTE: You may skip this step if you have installed MTK USB Drivers already.
4. Extract SP Flash Tools which you have downloaded in the step 1 above on a folder on your PC.
5. In the SP Flash Tool folder (from step 3 above), locate Flash Tool.exe and double-click to open it. You may also right-click and launch it as Admin.

Hisense F31 Stock Firmware Flash Guide -Step 5

6. When SP Flash Tools UI shows up, click Scatter Loading. A window will pop up. Navigate to the folder where you have extracted your Hisense F31 stock ROM and select MTKXXXX-Android-Scatter... where xxxx refers to your Hisense F31 MTK version.
Hisense F31 Stock Firmware Flash Guide -Step 6

Hisense F31 Stock Firmware Flash Guide -Step 6-B

7. By now, SP Flash Tool should load and list all the partitions in the firmware folder. Mark everything partition except Preloader, UserData and Cache.
Hisense F31 Stock Firmware Flash Guide -Step 7

8. Now, click Download on SP Flash Tool.
Hisense F31 Stock Firmware Flash Guide -Step 8

9. Turn off your Hisense F31 or (remove battery from and re-insert it) again. Connect your Hisense F31 to the PC and briefly tap the Power button.
10. Once the device is connected, Windows will install the drivers necessary for the flashing operation and then, the flashing operation will commence.
11. When the flashing operation completes, SP Flash Tool will display a green PASS circle. Only then you may disconnect your phone from the PC.


If you encounter any errors while flashing your Hisense F31 using SP Flash Tool, refer to this List of All SP Flash Error Codes and Solutions here.

Other Tools that Can Flash Hisense F31 Stock Firmware

1. NCK Box Tutorial
2. Piranha Box Tutorial
3. Miracle Box Tutorial
4. QPST QFIL Tools - **for Innjoo Qualcomm chipsets


Video Tutorial: How to Flash All MTK Android Devices Including Hisense F31



Become An ArykTECH Specialist

Hisense F31 Stock ROM Firmware (Flash File) Hisense F31 Stock ROM Firmware (Flash File) Reviewed by ArykTECH S . O Arewa on August 02, 2017 Rating: 5

No comments:

feedback